Nobel Biocare® Brånemark® RP Abutments and Parts

Two straight abutments for RP

For a cement-retained crown on an RP implant, both options are preppable and come with the titanium screw. Pick by how close to the final shape you want to start.

	SLIAF ›	Simple Step ›
Profile diameter	5.0, 6.0mm	4.1, 5.0, 6.0mm
Collar height	1.0–4.0mm in ½mm steps	1, 2, 3, 4mm
Prep height	8mm	4.0, 5.5, 7.0mm
Stock sizes	14	36
Best when	You want fine collar steps to match tissue depth	You want a narrow 4.1mm profile or a shorter starting height

Seat it with the Implant Locator Pin

1. Thread the pin into the implant by hand. It shows the implant position and angle.
2. Slide the SLIAF or Simple Step down the pin until it seats.
3. Unscrew the pin and place the abutment screw.

Implant slightly off-angle? With the abutment on the pin, mark the reduction line, prep it outside the mouth and reseat. Add the Locator Pin (M2-ILP-20) on either product page.

More: all Nobel Biocare®-compatible videos.

Restoring a full arch? This RP category also carries the Multi-Unit® abutment and its impression coping, replica, temporary sleeve and Bar Coping (Laser-Weld). The Tapered Modification Abutment is a separate tapered design and does not take Multi-Unit® parts. See Multi-Unit® restorative parts.

Same 4.1mm platform, other systems

Disclaimer: Biomet 3i, 3i, ZimVie, Nobel Biocare, Brånemark, BioHorizons, Innova, Endopore, Entegra, Bio-Lok, Calcitek, ThreadLoc, IMTEC, IMZ, Lifecore, Steri-Oss, Sterngold and Swiss Implants are trademarks of their respective owners. Titan Implants, Inc. is an independent manufacturer of compatible prosthetic components and is not sponsored by, affiliated with, or endorsed by any implant manufacturer named on this page. References to trademarked names indicate compatibility only. Titan sells to dental professionals and laboratories only.