Innova Corp® Compatible Abutments & Parts

Titan Implants manufactures compatible prosthetic components for Innova Corporation implant systems, including the Endopore and Entegra lines. Innova Corp was a Canadian implant manufacturer known for the Endopore sintered porous surface implant. The company is no longer in operation, but many patients continue to have Innova implants in function. Titan supports two distinct Innova connections. All parts are machined from Grade 23 titanium (Ti-6Al-4V ELI) at our facility in Bergenfield, New Jersey.

Endopore & Entegra External Hex Compatible

Compatible components for Innova Endopore and Entegra implants with external hex connections. Available across three platform sizes, with the 4.1mm platform further divided by manufacturing era:

• 3.5mm Platform: Healing abutments, impression copings, analogs, straight locking abutments, bar posts, and ball abutments.
• 4.1mm Platform (After Year 2000, Ref 01B): Healing abutments, impression copings, analogs, straight locking abutments, post abutments, temporary abutments, multi-unit abutments, plastic sleeves, bar posts, and ball abutments.
• 4.1mm Platform (Before Year 2000, Ref 01): Impression copings, analogs, simple step abutments, titanium base abutments, temporary abutments, plastic sleeves, bar posts, and ball abutments.
• 5.0mm Platform: Healing abutments, impression copings, analogs, gold cylinders, straight locking abutments, bar posts, and ball abutments.

Important: The 4.1mm Endopore external hex platform changed prosthetic dimensions around the year 2000. Components for pre-2000 (Ref 01) and post-2000 (Ref 01B) implants are not interchangeable. Verify the implant reference number before ordering.

Endopore Internal One-Stage Compatible (4.8mm Octabutment)

Compatible components for the Innova Endopore Internal One-Stage implant with the 4.8mm platform. This system uses an octabutment interface. Titan manufactures:

• Octabutments: The abutment that seats into the one-stage implant.
• Octabutment Analogs: Lab replicas for model work.
• Octabutment Transfer Copings: Impression copings with guide pin.
• Octabutment Plastic Copings: Castable patterns for wax-up.
• Octabutment Straight Locking Sleeves: Titanium sleeves that index onto the octabutment.
• Octabutment Bar Posts: For laser-welded overdenture bar fabrication.
• Healing Abutments
• Titan Design Cementable Abutments & Analogs: Solid abutments compatible with the 4.8mm one-stage platform.

Frequently Asked Questions

What happened to Innova Corp?

Innova Corporation was a Canadian dental implant company that manufactured the Endopore and Entegra implant lines. The company is no longer in operation, but Titan continues to manufacture compatible restorative components for patients with these implants.

How do I tell the difference between Endopore external hex and one-stage?

The Endopore external hex is a two-stage implant with an external hex connection at the top of the fixture. The Endopore Internal One-Stage is a single-piece tissue-level implant that uses an octabutment interface. The connection type is documented in the surgical record. If unavailable, a periapical radiograph can help distinguish the implant design.

Why does the 4.1mm external hex have pre-2000 and post-2000 versions?

Innova changed the prosthetic dimensions of the 4.1mm Endopore external hex platform around the year 2000. The earlier version (Ref 01) and later version (Ref 01B) are not compatible with each other. Always verify the implant reference number from the patient record before ordering components.

Disclaimer: Innova Corp®, Endopore®, and Entegra® are trademarks of their respective holders. Titan Implants, Inc. is an independent manufacturer of compatible prosthetic components. References to trademarked names are used solely to indicate product compatibility. Titan Implants is not sponsored by, affiliated with, or endorsed by any referenced trademark holder.