BioHorizons® External Hex 4.0mm Abutments and Parts

SLIAF or Simple Step for BioHorizons®?

Both straight abutments are preppable and include the titanium screw. The table shows the stock sizes for the 4.0mm external hex.

	SLIAF ›	Simple Step ›
Profile diameter	5.0, 6.0mm	4.1, 5.0, 6.0mm
Collar height	1.0–4.0mm in ½mm steps	1, 2, 3, 4mm
Prep height	8mm	4.0, 5.5, 7.0mm
Stock sizes	14	36
Best when	You want fine collar steps and room to reduce	You want to start closer to the final shape

Seat it with the Implant Locator Pin

1. Thread the pin into the implant by hand. It shows the implant position and angle.
2. Slide the SLIAF or Simple Step down the pin until it seats.
3. Unscrew the pin and place the abutment screw.

Implant slightly off-angle? With the abutment on the pin, mark the reduction line, prep it outside the mouth and reseat. Add the Locator Pin (M2-ILP-20) on either product page.

More: BioHorizons®-compatible videos.

Same 4.1mm platform, other systems

Disclaimer: Biomet 3i, 3i, ZimVie, Nobel Biocare, Brånemark, BioHorizons, Innova, Endopore, Entegra, Bio-Lok, Calcitek, ThreadLoc, IMTEC, IMZ, Lifecore, Steri-Oss, Sterngold and Swiss Implants are trademarks of their respective owners. Titan Implants, Inc. is an independent manufacturer of compatible prosthetic components and is not sponsored by, affiliated with, or endorsed by any implant manufacturer named on this page. References to trademarked names indicate compatibility only. Titan sells to dental professionals and laboratories only.