UCLA Castable Abutment (All-Plastic Burnout Sleeve) compatible with Innova External Hex 3.5mm Platform — All-Plastic UCLA Sleeve, Hexed and Non-Hexed — Engaging or Non-Engaging, Titanium Screw Included (IP-35PS)

UCLA castable abutment (all-plastic burnout sleeve) for Innova 3.5mm. Wax up and cast a custom abutment or a screw-retained crown. Choose engaging (hexed) for single crowns or non-engaging for bridges and splinted units.

Please see instruction video by clicking here.  

Innovative Design

This Castable Abutment has horizontal grooves spaced at 1mm intervals around the circumference of the sleeve. These grooves aid in simplifying measurements and transferring measurement information between laboratory personnel and/or the dentist involved in the fabrication of the implant abutment. The remaining grooves enhance cement retention in the final casting.

Note: This product uses a 0.050" Hex Screw Driver. 

Recommended Accessory

The Titan Implant Locator Pin threads into the implant so the abutment slides over it and seats in sites with restricted visibility or access. It also checks implant parallelism intraorally or on the cast, and carries Castable Abutment during custom abutment wax-up. See it in use.

  Titan Implants’ Implant Locator Pin is a straight threaded pin with a serrated handle designed for several practical uses:

For Lifecore 3.3mm external hex implants, use: Titan Implant Locator Pin (1-72-ILP-22)

 Implant Locator Pin (Titan Exclusive)

 Video 3. How to create emergence profile by using Titan Implants' stock abutment

Video 2: Titan Implants' Taking Open Tray Impression Case Study

Not sure which to order? Engaging vs. non-engaging: how to choose.

Implant system and component names mentioned on this page are trademarks of their respective owners. Titan Implants, Inc. is not affiliated with, sponsored by, or endorsed by those companies; their names are used only to identify compatibility.