Keystone (Lifecore) Dental Stage-1 Compatible Wide Diameter 6.5mm Connection Titan Design Cement-On Crown (COC) Abutment Socket Wrench TO BE USED WITH TITAN DESIGN CEMENT-ON-CROWN (COC) ABUTMENT ONLY (TN-65SW-LC)

• Compatibility: Keystone, 6.5mm platform
• Component: Straight Abutment
• SKU: TN-65SW-LC
• Manufactured by: Titan Implants, Inc. — Bergenfield, New Jersey, USA

Wrench (screwdriver) for Lifecore Stage-1. Check the driver size listed on each screw or abutment page before ordering.

Straight abutments restore an implant with a cement-retained crown or splinted bridge. The abutment seats on the implant platform and is secured with a fixation screw, then prepared to the required height and margin position before the restoration is cemented.

TO BE USED WITH TITAN DESIGN 6.5MM WDS CEMENT-ON-CROWN (COC) ABUTMENT ONLY, SKU#TN-WNISA-LC

Compatible with Keystone / Lifecore implant systems with a 6.5mm platform. Manufactured from medical-grade titanium in Bergenfield, NJ. Each component is dimensionally verified against the implant connection geometry before shipment.

Made in the USA by Titan Implants.

This platform is no longer manufactured by the original supplier. Titan Implants continues to machine compatible restorative components for it, so existing cases can be restored and maintained.

Verification of the seated implant platform and prosthetic connection prior to ordering is the responsibility of the treating clinician or laboratory.

Shipping: ships same day when ordered by 4 PM ET, from our Bergenfield, New Jersey facility.

Implant system and component names mentioned on this page are trademarks of their respective owners. Titan Implants, Inc. is not affiliated with, sponsored by, or endorsed by those companies; their names are used only to identify compatibility.