Precision-machined in Bergenfield, New Jersey from Ti-6Al-4V ELI (Grade 23) — the extra-low-interstitial titanium alloy specified for demanding medical-implant applications. Titan’s straight locking abutment is a stock, prep-ready definitive abutment for the ZimVie TSV and TSX 4.5 mm internal-hex platform, built for posterior restorations and offered in three emergence-profile diameters and seven selectable collar heights. Match emergence profile and soft-tissue height to the site directly off the shelf — semi-custom results at stock speed and stock cost, without the lab time or expense of a custom-milled abutment.

Compatible with ZimVie TSV (4.7 Ø) and TSX (5.4–6.0 Ø) implants · 4.5 mm platform · internal hex

✓ USA-machined  ·  ✓ Ti-6Al-4V ELI (Grade 23)  ·  ✓ FDA-cleared  ·  ✓ Same-day shipping

Key specifications

• Ti-6Al-4V ELI (Grade 23) extra-low-interstitial titanium — the medical-implant-grade alloy
• Precision-machined in Bergenfield, New Jersey, USA — FDA-cleared
• Straight (0°) design for balanced load distribution — well suited to posterior teeth
• Three emergence-profile diameters — 4.5 / 5.5 / 6.5 mm — for natural contouring and strong proximal contacts
• Seven collar heights — 1.0 / 2.0 / 2.5 / 3.0 / 3.5 / 4.0 / 4.5 mm — accommodate different soft-tissue thicknesses and implant depths
• Supports healthy gingival margins and papilla preservation
• Precision internal hex for an accurate fit with minimal micro-gap and micro-movement
• Titanium retaining screw included for secure seating and reliable torque
• Titan Implant Locator Pin compatible — eases intraoral seating and allows minor angle correction with a straight abutment
• Uses a 0.050″ hex screwdriver
• Same-day shipping and dedicated support for dental professionals nationwide

How the sizing range compares

Titan matches the OEM straight definitive abutment on emergence profiles for the 4.5 mm platform (4.5 / 5.5 / 6.5 mm). Where it pulls ahead is collar height — a fully selectable dimension here, versus the OEM’s single fixed collar. Seven heights let you seat the margin at the tissue crest without custom milling.

Comparison is against the OEM straight definitive abutment for the 4.5 mm platform.

Match emergence-profile diameter to the tooth

Aim for a smooth, concave-to-straight transition from the implant platform to the crown at the gingival level — avoiding overly convex or abrupt angles that trap plaque or contribute to tissue recession.

Conventional workflow

This is a conventional definitive abutment for cement- and screw-retained restorations — single or multi-unit. Prepare it directly for the case, or use it as the foundation for a lab-fabricated crown. Available in locking (engaging) only.

Clinical benefits

• Match individual patient anatomy without the cost or turnaround of a custom-milled abutment.
• Better esthetics, hygiene access, and long-term soft-tissue stability.
• Predictable, repeatable seating that reduces adjustments, remakes, and chair time.
• Versatile for premolar and molar single- or multi-unit restorations.

Selecting profile and collar height

• Start from the healing abutment already in place — its profile and height often guide the final choice.
• Use the Titan Implant Locator Pin to verify parallelism and available height before final selection.
• Give your lab the implant platform size, soft-tissue thickness, desired margin position, and photos or radiographs.
• When in doubt, choose a slightly taller collar or wider profile — it’s easier to reduce than to add material.

Recommended accessory: Titan Implant Locator Pin

A straight threaded pin with a serrated handle that simplifies intraoral seating when visibility or access is limited. Thread the pin into the implant by hand; the impression coping or abutment slides over the head and locks in place from the snug fit, then the pin is removed and replaced by the appropriate screw. The pin also checks parallelism and implant positioning — intraorally or on the model — and speeds custom-abutment fabrication in the lab. With the pin in place, minor angles can be corrected while still using a straight abutment.

For ZimVie TSV and TSX implants, use Titan Implant Locator Pin (1-72-ILP-22). View all locator pins.

See it in use

A short clinical video shows how to create an emergence profile with a Titan stock abutment and the Implant Locator Pin. Watch on Educational Videos.

Product notes

Available in locking (engaging) only. Uses a 0.050″ hex screwdriver.

Quality guarantee

Titan abutments are warranted against defects in materials and workmanship. If a product doesn’t meet our specifications, we’ll replace it or credit your account. See our Terms and Conditions of Sale for details.