Keystone (Lifecore) Dental Restore Systems Compatible Small Diameter Straight Abutment With Titanium Screw (LC-3.3SLIAF-02)

• Please see Instruction Video#3 here:

  3. How to create emergence profile by using Titan Implants' stock abutment and Titan Implant Locator Pin

• 1. How to take Open tray impression and use Keystone (Lifecore) Dental Compatible stock abutment to make crown and bridge

Recommended Accessory

The Titan Implant Locator Pin threads into the implant so the abutment slides over it and seats in sites with restricted visibility or access. It also checks implant parallelism intraorally or on the cast, and carries Castable Abutment during custom abutment wax-up. See it in use.

Titan’s abutments carry a wide range of emergence profiles which

contribute to a natural restoration.

Different cuff heights from 1.0mm to 4.0mm in 1/2mm increments. (Titan EXCLUSIVE)

Note: This product uses a 0.050" Hex Screw Driver. 

• 

   

   

  For 3.3MM Platform external hex implants, use: Titan Implant Locator Pin (1-72-ILP-22)

   

   

  

   

   

  

Implant Locator Pin (+$15 each) — seats on the implant or analog to measure tissue depth and guide the abutment into position. Titan-exclusive design; optimal use is one per abutment, reusable across cases. See the Implant Locator Pin in use.

See the technique: See how to create an emergence profile with a Titan stock abutment