A preppable engaging abutment with a wide emergence profile for the ZimVie / Biomet 3i Certain internal hex connection, 4.1mm seating surface. The blank is supplied with surplus axial and occlusal material so the margin, taper and emergence can be shaped chairside or on the model — a stock-cost route to a case-specific contour where a catalogue collar height does not follow the tissue. The wide profile suits molar and premolar sites where a standard abutment leaves an under-contoured emergence and a ledge at the crown margin. Supplied with a titanium fixation screw.

Which implants use the 4.0mm body / 4.1mm platform?

Recommended Accessory

The Titan Implant Locator Pin seats components where access is restricted and checks implant parallelism. See it in use.

Choosing the Right Abutment

  Titan Implants Inc carries two options of straight abutments available to restore 3i Certain implants: the Titan  Straight Locking Implant Abutment Flat, SKU#T-4ISLIAF  which comes with a flat side surface, collar heights 1,2,3, and 4mm, two emergence profile diameters and prep height of 8mm. The other is the  Modifiable abutment,  (SKU# T-4IMA-01 ) which is an abutment with a wide emergence profile that can be re-shaped to the desired form for individually fabricated cementable crown and bridge restorations and telescopic crown restorations.   5mm emergence profile for platform diameters 3.4mm (3.25mm diameter), 4.1mm, 5.0mm, and 6.0mm.

2. Open Tray and Final Restoration Technique for Biomet 3i Internal Connection Compatible System

 Note: This product uses a 0.050" Hex Screw Driver. 

0.050'' (1.27mm) Hex Screw Driver

handle designed for several practical uses:

At times, it may be difficult to insert an impression coping or abutment

appropriate screw.

 https://titanimplants.com/educational-videos/

Shipping: ships in 1–2 business days from our Bergenfield, New Jersey facility. Free shipping on orders over $199.