Gold-Base UCLA Castable Abutment compatible with Steri-Oss Replace-Select Tri-Lobe 4.3mm Platform with Gold Base — Titanium Screw Included (SRS-43GC)

What it is. This is a two-part pattern: a precious-metal cylinder that seats on the implant, with a plastic sleeve above it. The laboratory waxes the plastic to the shape the patient needs, then burns the plastic and wax away and casts an alloy onto the cylinder. The cylinder itself stays — it is not burned out — so the machined fit against the implant is preserved exactly. Use a castable when no stock abutment fits: the implant sits at an awkward angle, the gum height is unusual, or you want the crown screwed straight onto the implant with no cement line.

How to use it

1. Seat the gold cylinder on the model.
2. Wax the plastic sleeve to shape. Grooves spaced every 1mm let you measure and pass heights between laboratory and dentist.
3. Invest and burn out. The plastic and wax disappear; the cylinder remains.
4. Cast a compatible alloy onto the cylinder.
5. Divest, finish and fit. The remaining grooves help the casting hold cement.

Watch the instruction videos for this system →

About this particular size

• Supplied as: Non-Engaging, Engaging.

• A castable is consumed in casting, so order one per unit you intend to make.

Precious-metal cylinder with burnout plastic sleeve · Driver: 0.050" (1.27mm) hex · Machined at our facility in Bergenfield, New Jersey · Compatible with Steri-Oss Replace-Select 4.3mm.

System names are trademarks of their owners. Titan Implants, Inc. is not affiliated with, sponsored by, or endorsed by them; names identify compatibility only.

Also useful: the Titan Implant Locator Pin threads into the implant so the abutment slides over it and seats before you place the screw. It also lets you check implant parallelism. It is a seating tool, not an impression device, and it does not work with solid abutments, which have no through hole.