Healing Abutment compatible with Steri-Oss HL-Series/Replace External Hex 6.0mm (S-6HA)

What it is. A healing abutment is a short titanium cap that screws into the implant once it has integrated with the bone. It sticks up through the gum and holds the soft tissue open in the right shape while it heals, so there is a clean, ready-made opening when the final crown goes on. Without one, gum tissue closes over the implant and has to be cut open again later.

How to use it

1. Remove the cover screw from the integrated implant.
2. Screw the healing abutment in, hand tight.
3. Leave it in place while the gum heals around it, typically a few weeks.
4. Unscrew and discard it.
5. Take the impression or scan and fit the final abutment and crown.

Watch the instruction videos for this system →

About this particular size

• Collar (cuff) heights available: 4.0mm, 5.0mm, 6.0mm, 7.0mm — choose the height that places the margin at the tissue depth of the site.

• Pick the diameter to match the emergence profile you want, and the cuff height to match the gum thickness at that site.
• Single use.

Material: Grade 23 ELI titanium (Ti-6Al-4V ELI, ASTM F136) · Driver: 0.050" (1.27mm) hex · Machined at our facility in Bergenfield, New Jersey · Compatible with Steri-Oss Replace 6.0mm.

System names are trademarks of their owners. Titan Implants, Inc. is not affiliated with, sponsored by, or endorsed by them; names identify compatibility only.