Multi-Unit Abutment compatible with Steri-Oss Non-Hexed Flat-Top 3.8mm Multi-Unit Abutment Collar Height 4.0mm (S-38FTMUA-4.0)

What it is. A multi-unit abutment screws into the implant and raises the connection point up above the gum. Everything else in the case — bridge, bar, hybrid framework — then screws onto the multi-unit abutment rather than onto the implant itself. Two reasons.

How to use it

1. Screw one multi-unit abutment into each implant and torque to the system’s specification.
2. Leave them in place — they are not removed between stages.
3. Take an impression or scan at the abutment level, not the implant level.
4. The laboratory builds the bridge or framework to seat on the abutments.
5. The restoration screws onto the abutments with its own prosthetic screws.

Watch the instruction videos for this system →

• Impression copings, analogs, temporary sleeves and bar copings for this level seat on top of the abutment, not on the implant — order abutment-level parts.
• Choose the cuff height to match gum thickness at each site; heights usually differ around the arch.

Material: Grade 23 ELI titanium (Ti-6Al-4V ELI, ASTM F136) · Machined at our facility in Bergenfield, New Jersey · Compatible with Steri-Oss Flat-Top 3.8mm.

System names are trademarks of their owners. Titan Implants, Inc. is not affiliated with, sponsored by, or endorsed by them; names identify compatibility only.