Titanium Base Abutment compatible with NobelReplace® Tri-Channel NP 3.5mm — 6.0mm Height, Engaging or Non-Engaging (SRS-35TB6H-NB)

What it is. A titanium base is a short metal cylinder that seats on the implant and provides the machined connection. A zirconia or ceramic crown is designed digitally and then bonded onto it, so the precision interface is metal while the visible part is tooth-coloured. It is the standard foundation for a digitally designed restoration.

How to use it

1. Scan the implant position with a scan body.
2. Design the restoration digitally against the base geometry.
3. Mill the zirconia or ceramic.
4. Bond it to the titanium base with a suitable resin cement.
5. Screw the bonded restoration onto the implant and seal the access channel.

Watch the instruction videos for this system →

About this particular size

• Supplied as: Non-Engaging, Engaging.

• Surface preparation and the correct bonding agent determine how well the ceramic holds to the base.

Material: Grade 23 ELI titanium (Ti-6Al-4V ELI, ASTM F136) · Driver: 0.050" (1.27mm) hex · Machined at our facility in Bergenfield, New Jersey · Compatible with Nobel Biocare NobelReplace (Tri-Lobe / Tri-Channel) 3.5mm.

System names are trademarks of their owners. Titan Implants, Inc. is not affiliated with, sponsored by, or endorsed by them; names identify compatibility only.

Also useful: the Titan Implant Locator Pin threads into the implant so the abutment slides over it and seats before you place the screw. It also lets you check implant parallelism. It is a seating tool, not an impression device, and it does not work with solid abutments, which have no through hole.