Recommended Accessory

The Titan Implant Locator Pin threads into the implant so the abutment slides over it and seats in sites with restricted visibility or access. It also checks implant parallelism intraorally or on the cast, and carries Castable Abutment during custom abutment wax-up. See it in use.

Please see Instruction Video#2:

2. How To Do An Overdenture Restoration of Calcitek Integral Spline Compatible Implants With Bar Abutment For Laser-Welding

Bar Abutment abutments are titanium, non-engaging cylindrical posts are designed to seat directly into the implant or intermediate abutment that are laser-welded to titanium bars to create an all titanium bar or bridge framework. Implant bar restorations mostly have a minimum of two to five implants. In an ideal situation, hader bar and retentive clips are used in the anterior, whereas locking pin attachments are located distally for support and stability. The laser-welding technique eliminates the need for casting, waxing, investing, and finishing. The ideal implant bar system incorporates a bar and retentive clips in the anterior section and locking pin attachments distally for support and stability.

Note: This product uses a  0.050" Hex Screw Driver. 

Implant Locator Pin (+$15 each) — seats on the implant or analog to measure tissue depth and guide the abutment into position. Titan-exclusive design; optimal use is one per abutment, reusable across cases. See the Implant Locator Pin in use.

See the technique: See the laser-weld bar technique for this system