Bar Abutment (Laser-Weld) compatible with IMTEC External Hex 4.75mm Wide Body — Non-Engaging, Titanium Screw Included (I-4.75CA-12)

Bar abutment (bar post) for laser-welded bar frameworks — including Hader-style bars — in bar-retained overdentures on IMTEC® 4.75mm. Non-engaging, for splinted multi-implant frameworks. See bar-retained overdenture solutions.

Bar Abutment abutments are titanium, non-engaging cylindrical posts are designed to seat directly into the implant or intermediate abutment that are laser-welded to titanium bars to create an all titanium bar or bridge framework. Implant bar restorations mostly have a minimum of two to five implants. In an ideal situation, hader bar and retentive clips are used in the anterior, whereas locking pin attachments are located distally for support and stability. The laser-welding technique eliminates the need for casting, waxing, investing, and finishing. The ideal implant bar system incorporates a bar and retentive clips in the anterior section and locking pin attachments distally for support and stability.

Note: This product uses a  0.050" Hex Screw Driver. 

 2. How To Do An Overdenture Restoration of Calcitek Integral Spline Compatible Implants With Bar Abutment For Laser-Welding

Note: This product uses a  0.050" Hex Screw Driver. 

Recommended Accessory

The Titan Implant Locator Pin seats components where access is restricted and checks implant parallelism. See it in use.

Implant Locator Pin (+$15 each) — seats on the implant or analog to measure tissue depth and guide the abutment into position. Titan-exclusive design; optimal use is one per abutment, reusable across cases. See the Implant Locator Pin in use.

See the technique: See the laser-weld bar technique for this system

Implant system and component names mentioned on this page are trademarks of their respective owners. Titan Implants, Inc. is not affiliated with, sponsored by, or endorsed by those companies; their names are used only to identify compatibility.