Tapered Abutment compatible with BioHorizons® Internal Hex 4.5mm Platform — Choose Collar Height, Non-Engaging, Transmucosal (BHI-45TA-1)

What it is. A conical abutment screws into the implant and presents a tapered post above the gum. A matching cap or coping fits over the taper, holding the restoration by friction rather than by a screw through the crown. It suits overdentures and removable work where the patient needs to take the prosthesis in and out, and it gives a retrievable connection without a visible screw hole.

How to use it

1. Screw the conical abutment into the implant and torque to specification.
2. Seat the matching cap or coping over the taper.
3. Process the cap into the prosthesis, chairside or at the laboratory.
4. Fit the prosthesis over the abutments.
5. Replace worn retention inserts as part of routine maintenance.

Watch the instruction videos for this system →

About this particular size

• Collar (cuff) heights available: 2.0mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm — choose the height that places the margin at the tissue depth of the site.

• Choose the cuff height to match gum thickness at the site.

Material: Grade 23 ELI titanium (Ti-6Al-4V ELI, ASTM F136) · Machined at our facility in Bergenfield, New Jersey · Compatible with BioHorizons Internal Hex 4.5mm.

System names are trademarks of their owners. Titan Implants, Inc. is not affiliated with, sponsored by, or endorsed by them; names identify compatibility only.