• Specifically designed for older Astra Tech 3.5mm diameter implants with 2mm thread profile (pre-OsseoSpeed TX system)
• Reliable ball head design with metal housing and O-rings for strong, long-term overdenture retention
• Excellent mechanical retention and ease of insertion/removal for patients
• Precision-machined for accurate fit on legacy Astra Tech connections
• Ideal for overdenture cases on older implant systems where the current TX/OsseoSpeed connection is not compatible
• Includes all necessary components for immediate use
• Proudly manufactured in Bergenfield, New Jersey, USA – FDA-cleared quality

Ball head abutment is a one piece abutment with a superior ball projection that is used with two or more implants to fixate dentures to implants in a fully edentulous arch. It comes with a metal housing and retentive rubber o-rings. Ball head abutments can be processed into the denture using pick-up chairside technique or laboratory technique.

• Ball head abutment comes as a kit which includes Metal Housing & Two Rubber O-Rings
• Requires additional purchase of BALL HEAD WRENCH for first time orders.
• Ball Head Wrench must be purchased separately.
• Recommend the use of two ball head abutments per patient. The use of more than two ball head abutments may have problems with parallelism

Technical Considerations :

• A minimum inter-occlusal clearance of 6mm and cuff height is required.
• Implants must be relatively parallel to one another with less than 10 degree total divergence.