Straight Abutment compatible with ZimVie Biomet 3i External Hex 5.0mm Platform — Hexed, Titanium Screw Included (T-5SLIAF-02)

• Compatibility: Biomet 3i Ext Hex, 5.0mm platform
• Component: Straight Abutment (Post)
• Engagement: Hexed (engaging) for single crowns
• Material: Grade 23 ELI titanium (Ti-6Al-4V ELI), ASTM F136
• Includes: Titanium screw included
• Manufactured by: Titan Implants, Inc. — Bergenfield, New Jersey, USA

Straight abutment (stock titanium abutment) for Biomet 3i External Hex 5.0mm. Engaging (hexed) — for single-unit restorations. Choose collar (cuff) height and profile diameter with the Abutment Sizing Guide; see engaging vs. non-engaging. Not sure which part fits? See the 3i External Hex abutment selection guide.

• Titan Implants offers two types of straight abutments to restore 5.0mm platform external hex implants. One is the Straight Locking Implant Abutment Flat which has a standard prep height of 8mm, comes in collar heights 1 through 4mm, and an emergence profile diameters of 6mm. The other is the Simple Step Abutment, an exclusive Titan made product, that offers a hex instead of a flat side, three emergence profile diameters (5, and 6mm) prep heights of 4.0, 5.5, and 7.0mm, and collar heights 2 and 4mm. 
• Straight locking design with flat profile provides anti-rotation and orientation during placement
• Emergence profile diameters: 6.0mm for natural soft tissue contouring, better esthetics, and healthy gingival adaptation
• Collar heights: 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm (0.5mm increments-TITAN EXCLUSIVE) – choose the ideal gingival height for each case 
• Medical-grade titanium construction
• Includes titanium fixation screw – ready for immediate use in cement-retained restorations
• Cost-effective, high-performance alternative to OEM ZimVie 3i abutments with full compatibility
• Ideal for posterior restorations where wider platforms enhance load distribution and soft tissue support

• Horizontal grooves

•  

  Simplify placement with the Titan Implant Locator Pin – insert the pin first for easier guidance and alignment of the straight locking abutment (especially in areas with limited visibility or access), then remove and replace with the fixation screw; also helps verify parallelism

   

   

3. How to create emergence profile by using Titan Implants' stock abutment and Titan Implant Locator Pin

https://titanimplants.com/educational-videos/

• Note*Abutment available in locking only, see Bar Abutment for non-engaging option SKU#T-5CA-12
  

   

   Note: This product uses a 0.050" Hex Screw Driver. 

   

  

   

   

  For 5.0mm Platform external hex implants, use: Titan Implant Locator Pin (M2-ILP-20)

   

   

  

   

   

  

Shipping: ships same day when ordered by 4 PM ET, from our Bergenfield, New Jersey facility.

Implant Locator Pin (+$15 each) — seats on the implant or analog to measure tissue depth and guide the abutment into position. Titan-exclusive design; optimal use is one per abutment, reusable across cases. See the Implant Locator Pin in use.

See the technique: See how to create an emergence profile with a Titan stock abutment

Implant system and component names mentioned on this page are trademarks of their respective owners. Titan Implants, Inc. is not affiliated with, sponsored by, or endorsed by those companies; their names are used only to identify compatibility.