• Specifically designed for ZimVie 3i / Biomet 3i External Hex 3.25mm body diameter implants with 3.4mm platform (Purple color code)
• Straight locking design with flat profile provides superior anti-rotation stability and precise abutment orientation
• Platform: 3.4mm (Purple) – ideal for narrow ridges and anterior esthetic zones
• Collar heights: 4.0mm – select the exact height for optimal gingival adaptation
• Medical-grade titanium construction ensures biocompatibility, strength, and corrosion resistance
• Includes titanium fixation screw – ready for immediate clinical use in cement-retained or screw-retained restorations
• Tight machining tolerances minimize micro-movement and support long-term prosthetic success
• Cost-effective, high-performance alternative to OEM ZimVie 3i abutments while maintaining full compatibility
• Perfect for narrow-diameter implant cases requiring excellent esthetics and soft tissue support
• Horizontal grooves assist in height measurements and adjustments, and also significantly increases cement retention while still allowing retrievability.

• Simplify placement with the Titan Implant Locator Pin – insert the pin first for easier guidance and alignment of the straight locking abutment (especially in areas with limited visibility or access), then remove and replace with the fixation screw; also helps verify parallelism

• For non-engaging option, see SKU# T-34CA-12

• Please see Instruction Videos below:

   3. How to create emergence profile by using Titan Implants' stock abutment with Titan Implant Locator Pin 

  •  Note: This product uses a 0.050" Hex Screw Driver. 

     

    0.050'' (1.27mm) Hex Screw Driver

  • To fit original Straumann torque wrench:

    0.050'' Hex Driver can be used with the Titan Straumann Torque Wrench Adaptor SKU#IS-TWSHA

   OR

   To fit original Nobel Biocare torque wrench  0.050'' Hex Driver can be used with Titan Nobel Biocare wrench adaptor SKU: NB-TWSHA

   
  

   

   RECOMMENDED ACCESSORY

   Titan Implants’ Implant Locator Pin (click for instruction video) is a straight threaded pin with a serrated handle designed for several practical uses:

   At times, it may be difficult to insert an impression coping or abutment intraorally due to impaired visibility or access. The implant locator is easier to screw into the implant. Once inserted, by hand, the impression coping or abutment will slide over the pin and lock in place because of the snug fit of the head. Then the implant locator pin is removed and replaced by the appropriate screw.

   The implant locator pin can be used to check for parallelism and positioning of the implants intraorally. This can be done in the lab too. In the lab, the implant locator pin is convenient for custom abutment fabrication. Simply slide the plastic sleeve down the implant locator pin and proceed to wax-up to the appropriate gingival height. The ease of sliding the abutment on and off saves time and simplifies lab work. (This can be actually done in the mouth)

   The implant locator pin comes in three different lengths and different threads to match various manufacturers. Click here for list of implant locator pins.

   Corresponding implant locator pin with ZimVie 3i 3.25mm Diameter/3.4mm Platform External Hex compatible Titan abutment: Titan Implant Locator Pin SKU# M2-ILP-20)

   

    

   

   

   

   

  With the help of the implant locator pin, minor angles can be corrected while still using straight abutments.

   

   

Implant Locator Pin (+$15 each) — seats on the implant or analog to measure tissue depth and guide the abutment into position. Titan-exclusive design; optimal use is one per abutment, reusable across cases. See the Implant Locator Pin in use.

See the technique: See how to create an emergence profile with a Titan stock abutment