Open-Tray Impression Coping compatible with ZimVie Biomet 3i External Hex 6.0mm Platform (T-6IIC)

• Compatibility: Biomet 3i Ext Hex, 6.0mm platform
• Component: Impression Coping
• Manufactured by: Titan Implants, Inc. — Bergenfield, New Jersey, USA

Open-tray impression coping (direct transfer / pick-up coping) for Biomet 3i External Hex 6.0mm. Picked up in an open-tray impression to record implant position and orientation at implant level; pair it with the matching implant analog for the working cast. Not sure which part fits? See the 3i External Hex abutment selection guide.

The Titan Implants T-6IIC is a USA-made implant-level impression coping designed for use with ZimVie and Biomet 3i external hex implant systems at the 6.0mm seating surface. Available  open tray (direct transfer) impression technique, it gives the restorative team flexibility to use their preferred clinical workflow.

What it does: The impression coping is placed directly on the implant intraorally and used to capture the precise position and rotational orientation of the 6.0mm external hex in the impression material. Once removed and coupled with the T-6IA implant analog, the lab can pour an accurate working model — the foundation for a well-fitting final restoration.

Key Features:

• Compatible with ZimVie / Biomet 3i External Hex 6.0mm seating surface implant systems
• Available in open tray (direct transfer) configurations
• External hex engagement captures accurate anti-rotation positioning in the impression
• Compatible with Titan Implants' Implant Locator Pin for improved intraoral access and seating
• Uses a 0.050" (1.27mm) hex screwdriver (sold separately)
• Proudly manufactured in the USA (Bergenfield, NJ)

Clinical Tip: For cases with limited access or reduced visibility, Titan's Implant Locator Pin can be used to seat the coping first. The coping slides over and locks onto the pin head, then the pin is removed and replaced with the appropriate screw — a technique unique to Titan Implants' system.

Designed for: Dentists and prosthodontists restoring wide-diameter 6.0mm external hex Biomet 3i or ZimVie implants.

Note: This product uses a 0.050" (1.27mm) Hex Screw Driver, available separately.

 Design Features:

 Our impression copings and screws are designed for ease of use in the impression stage. The coping design of two flat sides and significant horizontal groove allow for a strong lock in the impression material.  For added stability the clinician may use the horizontal groove to lock numerous implant copings together with the dental floss technique. Another added feature of the coping is a wider base, which will accommodate the Castable Abutment in the laboratory phase. The retaining screw which comes in lengths of 22, 24, and 26mm is what really enhances the ease of use of the impression coping. The knurled head is easy to grip and tighten into the implant. Using the proper length should allow the screw head to clear the impression tray (open tray technique), permitting an uncomplicated removal of the screws and the impression.

 2. Titan Implants' Taking Open Tray Impression Case Study  (click the link)

Note: This product uses a 0.050" Hex Screw Driver. 

Recommended Accessory

The Titan Implant Locator Pin seats components where access is restricted and checks implant parallelism. See it in use.

Shipping: ships same day when ordered by 4 PM ET, from our Bergenfield, New Jersey facility.

Implant system and component names mentioned on this page are trademarks of their respective owners. Titan Implants, Inc. is not affiliated with, sponsored by, or endorsed by those companies; their names are used only to identify compatibility.