The Titan One Stage compatible system is a unique solution for the problems inherent to the tapered Cementable abutment.

*Has an Internal Thread Diameter M1.4.

https://titanimplants.com/straumann-tissue-level-rn-wn-solid-abutments-videos-titan/

Increase prosthetic retention.

 The Titan design incorporates a hexed collar that more than doubles prosthetic retentiveness. It also incorporates a deep circumferential groove just above the hex

portion that also contributes to retentiveness and is an integral component of the transfer system.

 Attachment tools

 The Titan Design Cementable abutment system requires a socket wrench and a hand tightening tool that fits over the socket wrench. These tools will allow the dentists to easily achieve hand tightening of more than 20Ncm.

You may also insert the socket wrench into a torque wrench and use that assembly to tighten the attachments. 20Ncm is all the force that is necessary since our attachments are precisely manufactured.

Top surface receptacle

The top surface has an internally threaded receptacle that can be used in the following ways:

Attach the enclosed inserting screw to easily carry the abutment to the implant

Insert implant locators to help judge proper angulation corrections

Convert or construct very retentive fixed detachable cases on One Stage implants

Transfer system

The system includes Titan’s highly accurate single piece transfer copings.

The system is best used with a closed tray impergum impression.

Non-parallel placements of implants

Often attachments have to be modified due to non-parallel replacements.

See instruction videos for this system