Ball Abutment compatible with Keystone (Lifecore) Dental Restore Systems Wide Diameter — with Metal Housing & 2 O-Rings (NB-5EBHA-1.0-LC)

Ball abutment (O-ring / ball attachment) for implant-retained overdentures on Lifecore Restore WD. Supplied with metal housing and two O-rings. See all overdenture ball abutments and replacement O-rings.

2. Overdenture Restoration Of Nobel Biocare Compatible Branemark Implants Using Ball Head Abutments (Chairside Technique)

4. How To Restore A Biomet External Hex Compatible Implants With Ball Head Abutments Using Open Tray Impression Technique.

Corresponding ball head abutment analog SKU#NB-5EBHAA

• Ball head abutment comes as a kit which includes Metal Housing & Two Rubber O-Rings
• Requires additional purchase of BALL HEAD WRENCH for first time orders.
• Ball Head Wrench must be purchased separately.
• Recommend the use of two ball head abutments per patient. The use of more than two ball head abutments may have problems with parallelism

Technical Considerations:

• A minimum inter-occlusal clearance of 6mm and cuff height is required.
• Implants must be relatively parallel to one another with less than 10 degree total divergence.

To fit original Nobel Biocare torque wrench:

Titan Ball Head Abutment wrench SKU#TN-BHW can be used with Titan Nobel Biocare wrench adaptor

SKU: NB-TWSHA: 

 OR

To fit original Straumann torque wrench:

Titan Ball Head Abutment wrench SKU#TN-BHW can be used with the Titan Straumann Torque Wrench Adaptor

SKU#IS-TWSHA: 

See the technique: See the overdenture technique for this system

Implant system and component names mentioned on this page are trademarks of their respective owners. Titan Implants, Inc. is not affiliated with, sponsored by, or endorsed by those companies; their names are used only to identify compatibility.