Titanium temporary abutment for Straumann tissue level implants with the WN 6.5mm internal octagon. Also called a provisional abutment, temporary cylinder or interim abutment. Machined to the referenced system's original prosthetic specifications.

WN components are platform-specific. RN and WN synOcta parts are not interchangeable — a WN component requires a 6.5mm shoulder. Verify the shoulder diameter, not the implant body diameter, before ordering. This is the most common ordering error on tissue level cases.

Built for the wide-diameter site. WN implants are typically placed in molar positions, where the provisional carries a larger occlusal table and more load. The 6.5mm shoulder gives the acrylic a wider base of support and a shorter, broader emergence path than the RN equivalent.

Textured surface for acrylic. The coronal wall is machined with a retentive texture so provisional acrylic or composite bonds mechanically. Build chairside or on the model, then refine the contour as the tissue matures.

Available in Locking and Non-Locking. The base engages the implant's internal octagon, so the provisional is indexed and anti-rotational, and can be removed and reseated in a known position across appointments.

Restores at implant level. This seats directly on the implant shoulder. If a WN solid abutment or screw-retained abutment is already placed, the part needed is a coping for that abutment, not this one.

Fits the internal octagon. The synOcta connection was introduced in 1999. Tissue level implants placed before then have the 8° Morse taper but no octagon, and an octagon-engaging component will not index. A radiograph or the patient's implant passport will usually settle it.

Interim use only. Provisional restorations are not intended for definitive service.

Driver requirement. Uses a 0.050" hex screwdriver, sold separately. A square-head adapter (IS-TWSHA) is available for torquing with a Straumann wrench.

Grade 23 titanium (Ti-6Al-4V ELI) screw included.

Titan Implant Locator Pin. A reusable seating and orientation tool made by Titan Implants, sold separately.

Related WN 6.5mm internal octagon components. Abutment impression coping (ITI-65SOIAC) · implant replica · castable abutment (IS-65SOPSL) · WN solid abutments.

Manufactured in Bergenfield, New Jersey. SKU ITI-65SOTA.

Note: This product uses a 0.050" Hex Screw Driver. 

0.050'' (1.27mm) Hex Screw Driver

To fit original Straumann torque wrench:

0.050'' Hex Driver can be used with the Titan Straumann Torque Wrench Adaptor

SKU#IS-TWSHA: https://titanimplants.com/square-head-screwdriver-adapter-for-straumann-torque-wrench-is-twsha/

OR

 To fit original Nobel Biocare torque wrench

0.050'' Hex Driver can be used with a Titan Nobel Biocare wrench adaptor

SKU: NB-TWSHA: https://titanimplants.com/square-head-screwdriver-adapter-for-nobel-biocare-torque-wrench-nb-twsha/