Prepable Abutment compatible with Calcitek Threadloc External Hex 3.75mm Simple Step Abutments — Titanium Screw Included, Simple Step Design (T-4ESA-C)

What it is. A prepable abutment is a solid titanium abutment you can grind and shape in the mouth or on the model, the same way you would prepare a natural tooth. It arrives oversized; you cut it back to the margin, height and taper the case needs. It is the fastest way to handle a case where a stock abutment is nearly right but not quite, without sending the case out for a custom-milled or cast abutment.

How to use it

1. Seat the abutment on the implant.
2. Mark the margin and the reduction you need.
3. Prepare it with a diamond bur under water spray, on the model or in the mouth.
4. Torque it to the system’s specification.
5. Take the impression or scan and make the crown against the prepared shape.

Watch the instruction videos for this system →

About this particular size

• Collar (cuff) heights available: 1.0mm, 2.0mm, 3.0mm, 4.0mm — choose the height that places the margin at the tissue depth of the site.
• Emergence profile diameters available: 4.1mm, 5.0mm, 6.0mm.
• Prep heights available: 4.0mm, 5.5mm, 7.0mm.

• Engaging — it indexes to the implant’s hex so the restoration cannot rotate. Use it for single crowns.
• Keep enough wall thickness when preparing. Over-reduction weakens the abutment.

Material: Grade 23 ELI titanium (Ti-6Al-4V ELI, ASTM F136) · Machined at our facility in Bergenfield, New Jersey · Compatible with Calcitek External Hex 3.75mm.

System names are trademarks of their owners. Titan Implants, Inc. is not affiliated with, sponsored by, or endorsed by them; names identify compatibility only.