Post Abutment compatible with Calcitek Threadloc External Hex 3.75mm Post Abutments for Bite Registration (T-4PABR-C)

What it is. A post abutment is a cylindrical abutment that screws into the implant and provides a post for the crown to be built on or cemented over. It is supplied in a range of diameters, cuff heights and post heights so you can pick the one closest to the case. It is a straightforward cemented-crown solution where the implant is well positioned.

How to use it

1. Remove the healing abutment.
2. Select the cuff height that places the margin at or just below the gum.
3. Seat the post abutment and torque to specification.
4. Take the impression or scan.
5. Cement the crown and remove all excess cement.

Watch: How To Place A Calcitek Integral Spline Compatible Cement-on-crown One Piece Post Abutment (Used for multi-unit restorations) →

About this particular size

• Collar (cuff) heights available: 2.0mm, 4.0mm — choose the height that places the margin at the tissue depth of the site.
• This version: Abutments for Bite Registration.

• Non-engaging — it does not index to the implant’s hex, so several units can seat on one framework. Use it for bridges and splinted multiple-unit work.
• Residual cement below the gum is a common cause of peri-implant inflammation. Keep the margin accessible.

Material: Grade 23 ELI titanium (Ti-6Al-4V ELI, ASTM F136) · Driver: 0.050" (1.27mm) hex · Machined at our facility in Bergenfield, New Jersey · Compatible with Calcitek External Hex 3.75mm.

System names are trademarks of their owners. Titan Implants, Inc. is not affiliated with, sponsored by, or endorsed by them; names identify compatibility only.

Also useful: the Titan Implant Locator Pin threads into the implant so the abutment slides over it and seats before you place the screw. It also lets you check implant parallelism. It is a seating tool, not an impression device, and it does not work with solid abutments, which have no through hole.