Innovative Design

 This Castable Abutment has horizonal grooves spaced at 1mm intervals around the circumference of the sleeve. These grooves aid in simplifying measurements and transferring measurement information between laboratory personnel and/or the dentist involved in the fabrication of the implant abutment. The remaining grooves enhance cement retention in the final casting.

 Note: This product uses a 0.050" Hex Screw Driver. 

Recommended Accessory

The Titan Implant Locator Pin threads into the implant so the abutment slides over it and seats in sites with restricted visibility or access. It also checks implant parallelism intraorally or on the cast, and carries Castable Abutment during custom abutment wax-up. See it in use.

Titan Implants’ Implant Locator Pin is a straight threaded pin with a serrated handle designed for several practical uses:

For Calcitek Spline implants, use: Titan Implant Locator Pin (1-72-ILP-22)

 Implant Locator Pin (Titan Exclusive)

Video 3. How to create emergence profile by using Titan Implants' stock abutment

 Video 2: Titan Implants' Taking Open Tray Impression Case Study

Not sure which to order? Engaging vs. non-engaging: how to choose.

Implant Locator Pin (+$15 each) — seats on the implant or analog to measure tissue depth and guide the abutment into position. Titan-exclusive design; optimal use is one per abutment, reusable across cases. See the Implant Locator Pin in use.