Abutment-Level Impression Coping compatible with Calcitek External Spline 3.75/4.0mm Shouldered Abutment with Guide Pin (5.5mm Flare) (C-55SAIC)

• Compatibility: Calcitek Spline, 3.75/4.0mm platform
• Component: Impression Coping
• SKU: C-55SAIC
• Manufactured by: Titan Implants, Inc. — Bergenfield, New Jersey, USA

Abutment-level impression coping that seats over the abutment — not directly on the implant — for Calcitek® Spline 3.75/4.0mm.

Guide pins are restorative instruments used to locate and align implant components. The pin threads into the implant so a coping or abutment can be slid over it and seated where direct visibility or access is limited.

Calcitek Compatible Shouldered Abutment Impression Coping 5.5mm Flare | C-45SAIC

Specifically manufactured for full compatibility with the Calcitek Spline Shouldered Abutment systems, this transfer component allows clinicians to capture the intraoral margin position, height, and orientation of the seated shouldered abutment during the restorative impression phase.

Note: Uses a 0.050'' hex screwdriver

This platform is no longer manufactured by the original supplier. Titan Implants continues to machine compatible restorative components for it, so existing cases can be restored and maintained.

Verification of the seated implant platform and prosthetic connection prior to ordering is the responsibility of the treating clinician or laboratory.

Shipping: ships same day when ordered by 4 PM ET, from our Bergenfield, New Jersey facility.

See the technique: See the abutment-level closed tray impression technique

Implant system and component names mentioned on this page are trademarks of their respective owners. Titan Implants, Inc. is not affiliated with, sponsored by, or endorsed by those companies; their names are used only to identify compatibility.