ZimVie Biomet 3i Certain Compatible Bar Abutment (Laser Weld) with Titanium Screw (for Laser Welding) - 3.25mm Body, 3.4mm Platform Internal Hex (T-3.4ICA-12)

2. How To Do An Overdenture Restoration of Calcitek Integral Spline Compatible Implants With Bar Abutment For Laser-Welding

 A non-engaging titanium Bar Abutment (Laser Weld) for laser-welded framework fabrication on the ZimVie / Biomet 3i Certain internal hex connection, 3.4mm seating surface. The post is welded directly to the bar stock, so a screw-retained overdenture bar or fixed-detachable framework is built up on the model without casting — no investment, no burnout, and no casting shrinkage to compensate across the span. Because the joint is welded rather than cast, each post keeps its machined fit to the implant while the framework is being built. Supplied with a titanium fixation screw.

Which implants use the 3.25mm body / 3.4mm platform?

Recommended Accessory

The Titan Implant Locator Pin seats components where access is restricted and checks implant parallelism. See it in use.

Shipping: ships in 1–2 business days from our Bergenfield, New Jersey facility. Free shipping on orders over $199.

Implant Locator Pin (+$15 each) — seats on the implant or analog to measure tissue depth and guide the abutment into position. Titan-exclusive design; optimal use is one per abutment, reusable across cases. See the Implant Locator Pin in use.

See the technique: See the laser-weld bar technique for this system