Titan Implants Inc carries two options of straight abutments available to restore 3i Certain implants: the Titan Straight Locking Implant Abutment Flat, SKU#T-5ISLIAF which comes with a flat side surface, collar heights 1,2,3, and 4mm, two emergence profile diameters and prep height of 8mm. The other is the Modifiable abutment, (SKU#T-5IMA-01) which is an abutment with a wide emergence profile that can be re-shaped to the desired form for individually fabricated cementable crown and bridge restorations and telescopic crown restorations.  The modifiable abutment is available in a 6.5mm emergence profile for platform diameters 3.4mm (3.25mm diameter), 4.1mm, 5.0mm, and 6.0mm.

 Insert the modifiable abutment into the interface of the analog and tighten the analog into the analog/pin holder to modify the abutment to the desired angle. 

Modifiable abutment is an abutment with a wide emergence profile that can be re-shaped to the desired form for individually fabricated cementable crown and bridge restorations and telescopic crown restorations.  

• Available for 3i Certain 3.25mm, 4.1mm, 5.0mm & 6.0mm platforms
• Modifiable design with wide emergence profile for custom shaping
• Easily adjusted chairside or in the lab for ideal crown contours
• Precision internal hex ensures excellent fit
• Includes titanium screw for secure handling
• Multiple collar heights for soft tissue adaptation
• Versatile for cement-retained single or multi-unit restorations
• Proudly made in Bergenfield, New Jersey, USA
• Ideal when customization is required

  RECOMMENDED ACCESSORY: Titan Implants’ Implant Locator Pin

 Instruction Video: How to create an emergence profile using Titan Implants' stock abutment

2. Open Tray and Final Restoration Technique for Biomet 3i Internal Connection Compatible System

 Note: This product uses a 0.050" Hex Screw Driver. 

 0.050'' (1.27mm) Hex Screw Driver

Recommended Accessory

Titan Implants’ Implant Locator Pin is a straight threaded pin with a serrated handle designed for several practical uses:

• At times, it may be difficult to insert an impression coping or abutment intraorally due to impaired visibility or access. The implant locator is easier to screw into the implant. Once inserted, by hand, the impression coping or abutment will slide over the pin and lock in place because of the snug fit of the head. Then the implant locator pin is removed and replaced by the appropriate screw.
• The implant locator pin can be used to check for parallelism and positioning of the implants intraorally. This can be done in the lab too. In the lab, the implant locator pin is convenient for custom abutment fabrication. Simply slide the plastic sleeve down the implant locator pin and proceed to wax-up to the appropriate gingival height. The ease of sliding the abutment on and off saves time and simplifies lab work. (This can be actually done in the mouth)

The implant locator pin comes in three different lengths and different threads to match various manufacturers: https://titanimplants.com/titan-implants-locator-pins/

See educational video below:

 https://titanimplants.com/educational-videos/

 Corresponding implant locator pin with 3i internal hex compatible Titan abutment: Titan Implant Locator Pin (M1.6-ILP-22)

With the help of the implant locator pin, minor angles can be corrected while still using straight abutments.