• Designed for ZimVie 3i / Biomet 3i External Hex implants with wider restorative platforms: 6.0mm (Green color code)
• Straight locking design with flat profile delivers superior anti-rotation stability and easy, precise orientation during placement
• Emergence profile diameters: 6.0mm for natural soft tissue contouring, better esthetics, and healthy gingival adaptation
• Collar heights: 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm (0.5mm increments: Titan EXCLUSIVE – choose the ideal gingival height for each case
• Medical-grade titanium construction provides excellent biocompatibility, strength, and corrosion resistance
• Includes titanium fixation screw – ready for immediate use in cement-retained or screw-retained restorations
• Tight machining tolerances minimize micro-movement and promote long-term prosthetic success
• Cost-effective, high-performance alternative to OEM ZimVie 3i abutments with full compatibility
• Ideal for posterior restorations where wider platforms enhance load distribution and soft tissue support
• Horizontal grooves assist in height measurements and adjustments, and also significantly increases cement retention while still allowing retrievability.

• Simplify placement with the Titan Implant Locator Pin – insert the pin first for easier guidance and alignment of the straight locking abutment (especially in areas with limited visibility or access), then remove and replace with the fixation screw; also helps verify parallelism

Note*Abutment available in locking only, see bar post for non-engaging option SKU#T-6CA-12

Note: This product uses a 0.050" Hex Screw Driver. 

0.050'' (1.27mm) Hex Screw Driver

Please see Instruction Video#3 here:

3. How to create emergence profile by using Titan Implants' stock abutment and Titan Implant Locator Pin

 https://titanimplants.com/educational-videos/

RECOMMENDED ACCESSORY

 Titan Implants’ Implant Locator Pin (click link for instruction video) is a straight threaded pin with a serrated handle designed for several practical uses: 

• At times, it may be difficult to insert an impression coping or abutment intraorally due to impaired visibility or access. The implant locator is easier to screw into the implant. Once inserted, by hand, the impression coping or abutment will slide over the pin and lock in place because of the snug fit of the head. Then the implant locator pin is removed and replaced by the appropriate screw.
•  The implant locator pin can be used to check for parallelism and positioning of the implants intraorally. This can be done in the lab too. In the lab, the implant locator pin is convenient for custom abutment fabrication. Simply slide the plastic sleeve down the implant locator pin and proceed to wax-up to the appropriate gingival height. The ease of sliding the abutment on and off saves time and simplifies lab work. (This can be actually done in the mouth)

The implant locator pin comes in three different lengths and different threads to match various manufacturers.

 All implant locator pins are listed here: 

For 6.0mm Platform external hex implants, use: Titan Implant Locator Pin (M2-ILP-20)

With the help of the implant locator pin, minor angles can be corrected while still using straight abutments.