Please see instruction video by clicking here.  

 Note: This product uses a 0.050" Hex Screw Driver. 

 0.050'' (1.27mm) Hex Screw Driver

 Recommended Accessory

  Titan Implants’ Implant Locator Pin is a straight threaded pin with a serrated handle designed for several practical uses:

 At times, it may be difficult to insert an impression coping or abutment intraorally due to impaired visibility or access. The implant locator is easier to screw into the implant. Once inserted, by hand, the impression coping or abutment will slide over the pin and lock in place because of the snug fit of the head. Then the implant locator pin is removed and replaced by the appropriate screw.

 The implant locator pin can be used to check for parallelism and positioning of the implants intraorally. This can be done in the lab too. The implant locator pin can be placed in the analog or fixture. In the lab, the implant locator pin is convenient for custom abutment fabrication. Simply slide the plastic sleeve down the implant locator pin and proceed to wax-up to the appropriate gingival height. The ease of sliding the abutment on and off saves time and simplifies lab work. (This can be actually done in the mouth)

 The implant locator pin comes in three different lengths and different threads to match various manufacturers.

For Lifecore 4.1mm Platform external hex implants, use: Titan Implant Locator Pin (M2-ILP-20)

 Implant Locator Pin (Titan Exclusive)

 Video 3. How to create emergence profile by using Titan Implants' stock abutment

Video 2: Titan Implants' Taking Open Tray Impression Case Study