Titan Implants’ Implant Locator Pin is a straight threaded pin with a serrated handle designed for several practical uses: 

At times, it may be difficult to insert an impression coping or abutment intraorally due to impaired visibility or access. The implant locator is easier to screw into the implant. Once inserted, by hand, the impression coping or abutment will slide over the pin and lock in place because of the snug fit of the head. Then the implant locator pin is removed and replaced by the appropriate screw.

The implant locator pin can be used to check for parallelism and positioning of the implants intraorally. This can be done in the lab too. In the lab, the implant locator pin is convenient for custom abutment fabrication. Simple slide the plastic sleeve down the implant locator pin and proceed to wax-up to the appropriate gingival height. The ease of sliding the abutment on and off saves time and simplifies lab work. (This can be actually done in the mouth)

The implant locator pin comes in three different lengths and different threads to match various manufacturers.

All implant locator pins are listed here: https://titanimplants.com/titan-implants-locator-pins/

Implant Locator Pin instruction video: https://titanimplants.com/educational-videos/

For Advent compatible implant abutments, use: Titan Implant Locator Pin (1-72-ILP-22)

 Note*Abutment available in locking only

Straight (Locking/Non-Locking) Implant Abutment Flat is used in cement-retained restoration and designed to create a highly esthetic crown where conventional crown and bridge techniques are desired. They are used for single or multi-unit (splinted) restorations. They come in two types: locking (engages the anti-rotation of the implant) and non-locking (does not engage the anti-rotation of the implant)

*Can be used as an engaging impression coping. Use with long screw guide pin SKU#P-GPSS24 to do open tray technique. Comes with titanium screw (closed tray technique).

Note: This product uses a  0.050" Hex Screw Driver. 

0.050'' (1.27mm) Hex Screw Driver