Titanium Base (Locking/Non-Locking): short titanium connection feature in which a zirconia body is luted in the laboratory to provide a titanium-to-titanium interface with the implant platform, prevents stress from affecting the zirconia coping when screw is torqued

Insert Abutment are intermediate abutments used for bar overdenture, fixed/detachable, and tissue supported overdenture restorations available in heights of 3mm, 4mm, and 6mm

Note: This product uses a 0.050" Hex Screw Driver. 

0.050'' (1.27mm) Hex Screw Driver

RECOMMENDED ACCESSORY

 Titan Implants’ Implant Locator Pin is a straight threaded pin with a serrated handle designed for several practical uses: 

Implant Locator Pin instruction video: https://titanimplants.com/educational-videos/

At times, it may be difficult to insert an impression coping or abutment intraorally due to impaired visibility or access. The implant locator is easier to screw into the implant. Once inserted, by hand, the impression coping or abutment will slide over the pin and lock in place because of the snug fit of the head. Then the implant locator pin is removed and replaced by the appropriate screw.

 The implant locator pin can be used to check for parallelism and positioning of the implants intraorally. This can be done in the lab too. In the lab, the implant locator pin is convenient for custom abutment fabrication. Simple slide the plastic sleeve down the implant locator pin and proceed to wax-up to the appropriate gingival height. The ease of sliding the abutment on and off saves time and simplifies lab work. (This can be actually done in the mouth)

 The implant locator pin comes in three different lengths and different threads to match various manufacturers.

 All implant locator pins are listed here: https://titanimplants.com/titan-implants-locator-pins/

 For 4.5mm platform internal hex implants, use Titan Implant Locator Pin(1-72-ILP-22)

.

With the help of the implant locator pin, minor angles can be corrected while still using straight abutments.