Ball head abutment is a one piece abutment with a superior ball projection that is used with two or more implants to fixate dentures to implants in a fully edentulous arch. It comes with a metal housing and retentive rubber o-rings. Ball head abutments can be processed into the denture using pick-up chairside technique or laboratory technique.

• Ball head abutment comes as a kit which includes Metal Housing & Two Rubber O-Rings
• Requires additional purchase of BALL HEAD WRENCH for first time orders.
• Ball Head Wrench must be purchased separately.
• Recommend the use of two ball head abutments per patient. The use of more than two ball head abutments may have problems with parallelism

Technical Considerations :

• A minimum inter-occlusal clearance of 6mm and cuff height is required.
• Implants must be relatively parallel to one another with less than 10 degree total divergence.

 To fit original Nobel Biocare torque wrench:

Titan Ball Head Abutment wrench SKU#TN-BHW can be used with Titan Nobel Biocare wrench adaptor

SKU: NB-TWSHA: https://titanimplants.com/square-head-screwdriver-adapter-for-nobel-biocare-torque-wrench-nb-twsha/

 OR

To fit original Straumann torque wrench:

Titan Ball Head Abutment wrench SKU#TN-BHW can be used with the Titan Straumann Torque Wrench Adaptor

SKU#IS-TWSHA: https://titanimplants.com/square-head-screwdriver-adapter-for-straumann-torque-wrench-is-twsha/